Lampes
Recommandation


Français

For maximum safety and optimum performance with the Halogen Photo Optic lamp, the following precautions must be taken:

CAUTION:

  • This bulb MUST be used in a fixture that has a suitable protective shield and/or screening technique to protect people and surroundings against the risk of personal injury and/or property damage from bulb shattering and UV (ultraviolet) exposure, since:
    1. THIS BULB OPERATES AT HIGH INTERNAL PRESSURE AND AT HIGH SURFACE TEMPERATURE AND MAY UNEXPECTEDLY SHATTER RESULTING IN HOT, FLYING FRAGMENTS OF GLASS OR METAL.
    2. This bulb generates UV radiation that may cause skin and eye irritation with prolonged exposure.
  • To avoid risk of serious eye injury from the intense light, do not stare at operating bulb.
  • To avoid the possibility of fire, do not operate bulb close to materials that are combustible or affected by heat or drying.
  • To avoid electric shock, turn off power before attempting replacement
  • To avoid skin burns, wait for bulb to cool before handling.
  • For safe and proper bulb operation, operate bulb at rated voltage and wattage. Operation above rated voltage increases UV output and internal pressure, thus increasing the risk of rupture. Use only in equipment/fixture specifying this bulb type,
  • Do not move, bump or bounce equipment/fixture during operation because mechanical shock can cause shattering and failure of the bulb.
  • Replace all equipment/fixture covers and shields to prevent personal injury or property damage.

INSTALLATION

  • Do not use if bulb is scratched or damaged in any way.
  • To avoid damaging the glass, do not touch inner bulb or inside of reflector with bare hands. (Hold with clean cloth or tissue when installing. It touched, wipe off fingerprints before lighting.)
  • To avoid damage to bulb, do not twist. Pull old bulb straight out and push new bulb straight in.
  • When used in equipment designed to provide cooling to operating lamp, do not obstruct equipment cooling system.
  • Socket condition may affect bulb life, replace socket if deterioration of socket or bulb pins is observed.


[Reference Guide] [ How to do a search ]
[ How to use HMI lamp ] [ How to use MSR and HSR lamp ]

© 1996-2008 Gaétan Ruel