Laser


 

Policy of purchase Français

 


MODELS & SPECIFICATIONS
 

Click for larger photo

The classic Beamburst laser projectors are ideal for nightclubs, discos, raves, trade shows and other locations needing spectacular Star Wars-like laser beams and special effects.

Beamburst projectors shoot the laser in 8 or 10 different directions. Add-on modules split the beams into a few, or hundreds of smaller shafts, to fill your venue with laser light.

To become a "laser DJ", simply switch the mirrors to music using a standard DMX lighting controller.

Lumalaser has a wide selection of laser powers and colors available. The Beamburst projectors below fall into two groups, one with 10 beams (Diamond/Aqua) and one with 8 (all others). Within these two groups, you can select from the brightest power and best colors for your needs.
  
 

Click for larger photo Click for larger photo

 

FOR BEAMS AND EFFECTS
Beamburst model Diamond
350
Aqua
300
Fuchsia
50
Amber
50
Ruby
50
Emerald
50
Emerald
20
Amber
5
Ruby
5
Emerald
5
Photos
(click to enlarge photo)
Click for larger photo of Lumalaser Beamburst Diamond/Aqua series laser show projector Click for larger photo of Lumalaser Beamburst Amber series laser show projector Click for larger photo of Lumalaser Beamburst Ruby/Emerald series laser show projectors
Differences between models These two projectors differ in the laser color, power and type. These four "50-series" projectors have higher powers (compared to those listed to the right). They differ only in the laser color. This "20-series" projector is intermediate in power. These three "5-series" projectors have lower powers (compared to those listed to the left). They differ only in the laser color.
Laser power 350 mW
(over 1/3 watt)
300 mW
(just under 1/3 watt)
50 mW  (1/20 watt) 20 mW
(1/50 watt)
5 mW  (1/200 watt)
Colors
Models with two or more lasers allow mixing, to get in-between shades

Red, yellow, green, aqua, blue, violet.
Full dimming capabilities.

Green, aqua, blue, dark blue.
Full dimming capabilities.

Red, fuchsia, and deep violet (almost "black light")

Red, yellow, and green

Red

 

Green

 

Green

Red, yellow, and green

 

Red

 

Green

 

Laser type Laser diode (red) plus argon gas (green and blue) Argon gas (green and blue) Red (635nm) and deep violet (410nm) laser diodes Red (635nm) and green (532nm) laser diodes Red
(635nm)
laser diode
Green (532nm)
laser diode
Green
(532nm)
laser diode
Red (635nm) and green (532nm) laser diodes Red
(635nm)
laser diode
Green (532nm)
laser diode
Beam turrets 10
(6 can be on simultaneously)
8
Beam modules included 6 Single Beam Modules
2 Beam Splitter Modules
4 Diffraction Beam Modules
4 Color Splitter Modules
6 Single Beam Modules
2 Beam Splitter Modules
4 Diffraction Beam Modules
4 Color Splitter Modules
Auto-chase programs No Yes
Sound-activated programs No Yes
Internal beam selection
(for beam targeting)
No Yes
DMX-512 control channels 16
ü Click here for list of Diamond/Aqua DMX assignments.
Up to 16
ü Includes auto-chase feature (no DMX needed to do a chase)
Rear controls
(click to enlarge photo)
(photo not available) Click for larger photo
Dimensions 30"W x 13"D x 12"H
(76 x 33 x 30.5 cm)
24.5"W x 1.75"D x 10"H
(62 x 4.5 x 25 cm)
Weight 25 lbs. (11 kg) 7 lbs. (3 kg)
Power requirements 120 VAC 60 Hz.
15 amps (1700 watts)
100-240 VAC @ 50-60 Hz.
2 amps (20 watts)
ü Plug has built-in power supply, providing 12VDC @ 1 amp. Tip is positive (+), sleeve is negative (-).
Beamburst model Diamond
350
Aqua
300
Fuchsia
50
Amber
50
Ruby
50
Emerald
50
Emerald
20
Amber
5
Ruby
5
Emerald
5


[Colorburst]  [ Accessories ] 
Mail this site to a friend...

© 1996-2005 Gaétan Ruel